cancel
Showing results for 
Search instead for 
Did you mean: 
MrNorma
Contributor
436 Views
Message 1 of 71

HG612 / Third Party Settings.

I am looking got a list of setting to setup the HG612 or any other third party modem to work with a HH5 Type A.  After a morning of googling i have yet to find working informations and just thought you guys would know best.

0 Ratings
Reply
70 REPLIES 70
Distinguished Guru
434 Views
Message 2 of 71

Re: HG612 / Third Party Settings.

Plug it in the phone socket instead of the HH5 and plug it into the red WAN socket on the HH5.

 

Master socket --> Modem --> HH5

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
MrNorma
Contributor
427 Views
Message 3 of 71

Re: HG612 / Third Party Settings.

Ray i tried that and the HG612 never got a dsl sync. I left the modem by itself with nothing plugged into and it still didn't get a sync.

Plug the HH5 in and it works fine...?
0 Ratings
Reply
Distinguished Guru
423 Views
Message 4 of 71

Re: HG612 / Third Party Settings.

Is the HG612 unlocked?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
MrNorma
Contributor
422 Views
Message 5 of 71

Re: HG612 / Third Party Settings.

Its the actual WAN settings i was looking for?
0 Ratings
Reply
MrNorma
Contributor
420 Views
Message 6 of 71

Re: HG612 / Third Party Settings.

Unlocked with SP08 Original 

0 Ratings
Reply
Distinguished Guru
419 Views
Message 7 of 71

Re: HG612 / Third Party Settings.

What do you mean, sorry?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
MrNorma
Contributor
416 Views
Message 8 of 71

Re: HG612 / Third Party Settings.

I have just unlocked it to Firmware SP08 and i am pretty sure the WAN settings are wrong as it just sits on "initializing"
0 Ratings
Reply
MrNorma
Contributor
407 Views
Message 9 of 71

Re: HG612 / Third Party Settings.

Untitled-1.jpg

That is the settings under BASIC>WAN

0 Ratings
Reply
Distinguished Guru
406 Views
Message 10 of 71

Re: HG612 / Third Party Settings.

What settings do you have in Basic > PTM ?

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply