cancel
Showing results for 
Search instead for 
Did you mean: 
esc4p3
Aspiring Contributor
200 Views
Message 1 of 2

Infinity 1 - what changes your broadband speeds?

hi again

 

I have a couple of questions. When I first posted on this forum, I had posted the stats below

 

3. Firmware version:Software version 4.7.5.1.83.8.204.1.11 (Type A) Last updated 01/06/16
4. Board version:BT Hub 5A
5. DSL uptime:0 days, 23:29:48
6. Data rate:2615 / 20947
7. Maximum data rate:2615 / 21055
8. Noise margin:6.2 / 6.2
9. Line attenuation:36.3 / 28.5
10. Signal attenuation:36.0 / 23.7
11. Data sent/received:352.1 MB / 5.1 GB

 

The above was from the 17th June.

 

Checking again today it says

3. Firmware version:Software version 4.7.5.1.83.8.204.1.11 (Type A) Last updated 01/06/16
4. Board version:BT Hub 5A
5. DSL uptime:0 days, 03:17:17
6. Data rate:2771 / 19965
7. Maximum data rate:2758 / 19929
8. Noise margin:5.8 / 6.0
9. Line attenuation:36.0 / 28.3
10. Signal attenuation:35.9 / 23.6
11. Data sent/received:116.3 MB / 552.2 MB
12. Broadband username:bthomehub@btbroadband.com

 

In the intervening period, my maximum data rate dropped as low as 18mb or so. But following a spontaneous router reboot earlier - no idea why it rebooted it wasn't me - the upload is showing faster than it ever has whilst the download has recovered a bit. Is this just to be expected as I have only been connected for 3 weeks or so.

 

Also, presumably the data in line 11 resets after a router reboot?

 

thanks in advance 🙂

0 Ratings
Reply
1 REPLY 1
Distinguished Sage
Distinguished Sage
189 Views
Message 2 of 2

Re: Infinity 1 - what changes your broadband speeds?

your estimate was 23/16mb and you are still within estimate  a 1mb drop i speed after a reset is not unusual and it may increase by the same amout when hub next resets



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.