Lost over 4 mbps and decreasing over the past 2 weeks

[imjolly]

if there was banding then your attainable would be higher than your conenction speed but as you can see you have a conenction speed almost as good as attainable

have you tried or are you conencted to test socket with a new filter to see if that improves connecion speed and/or attainable speed?

you are well within you expected range for your conenction

[redleather]

Hi imjolly many thanks for the reply

Our max attainable rate has dropped by over 7mbs over the past 2-3 weeks it has been 55mbps.

We have fitted by a brilliant (Openreach Engineer) a data only twisted pair direct from copper connection box to house to an interstitial OpenReach MK 3 box and then to Smarthub 6A.

This has been brilliant affording 51mbps on wiFi for the past year and a half.

Why has this suddeny started to drop off and is still dropping.

Again many thanks for the reply.

[pippincp]

Connect to the test socket as requested by @imjolly and repost router stats.

[redleather]

Data rate:
6.00 Mbps / 49.71 Mbps
Maximum data rate:
6563 / 49978
Noise margin:
6.2 dB / 6.2 dB
Line attenuation:
20.7 dB
Signal attenuation:
VPI / VCI:
0/38
Modulation:
G_993_2_ANNEX_B
Latency type:
Fast Path
Data sent / received:
8193 MB Uploaded / 81922 MB Downloaded
Broadband username:
bthomehub@btbroadband.com
BT Wi-fi:
Not active
2.4 GHz wireless network name:
BTSHub-2.4
2.4 GHz wireless channel:
Smart (Channel 11)
5 GHz wireless network name:
BTSHub-5
5 GHz wireless channel:
Smart (Channel 36)
Wireless security:
WPA2 (Recommended)
Wireless mode:
Mode 1
Firewall:
On
MAC address:
88:A6:C6:34:5F:51
Software variant:
-
Boot loader:
7.33.1

[imjolly]

I assume the new stats are from the test socket.  your speed has increased very slightly as has your attainable speed and as from test socket you are not going to improve on that.  It also confirm there is no banding as you thought otherwise speed would not have changed just attainable would be different

As ECI cab there is no boost from G.INP