cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
busywait
Aspiring Contributor
239 Views
Message 11 of 14

Re: Mismatched max upload sync and low data rate on new connection?

Go to solution

Thanks all 

(Bing for G.INP seems to have a very relevant first hit: https://www.increasebroadbandspeed.co.uk/g.inp - thanks for mentioning it )

But because that's likely/possibly not in the cabinet that I'm served from I'll not get too excited.

As long as my connection floats up to the current technical limit, not an incorrect package limit, I'll be happy. 

Is  a 6dB noise margin the default target?

 

0 Ratings
Reply
pippincp
Distinguished Sage
220 Views
Message 12 of 14

Re: Mismatched max upload sync and low data rate on new connection?

Go to solution

Yes 6dB is target.

0 Ratings
Reply
busywait
Aspiring Contributor
195 Views
Message 13 of 14

Re: Mismatched max upload sync and low data rate on new connection?

Go to solution

My final question I think ...

What is the maximum data rate quoted? Is it the data rate with 0dB noise margin??

Tags (2)
0 Ratings
Reply
bkehoe
Contributor
168 Views
Message 14 of 14

Re: Mismatched max upload sync and low data rate on new connection?

Go to solution
No, it's the estimated maximum rate possible with the current SNR target. The default for up & down is 6dB but as low as 3dB can be used for downstream only on Huawei cabinets.
If interleaving is active on a line it distorts the maximum attainable figure though and will usually make it appear artificially high.