cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
3,273 Views
Message 1 of 19

No internet on activation day.

Go to solution

Hi. I received a text message on my activation day (today) telling me that my services are up and running. I set up the smarthub and everything was running fine until 6pm, I've had no Internet since then. Just a flashing purple light. I tried to use the troubleshooter online, but it says there are no accounts associated with my BT ID. 

0 Ratings
18 REPLIES 18
3,267 Views
Message 2 of 19

Re: No internet on activation day.

Go to solution

Is you phone working - has dial tone?

 



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
3,262 Views
Message 3 of 19

Re: No internet on activation day.

Go to solution

Yes, I have a dial tone. Just no Internet.

 

Edit - The light is now solid orange. 

0 Ratings
3,244 Views
Message 4 of 19

Re: No internet on activation day.

Go to solution

@Jedimaster wrote:
Yes, I have a dial tone. Just no Internet.

Check your phone number is correct, by dialling 17070 and listening to the number read out.

What does your master phone socket look like?

 

Keith_Beddoe_0-1577035081757.jpegKeith_Beddoe_1-1577035100602.jpeg

0 Ratings
3,242 Views
Message 5 of 19

Re: No internet on activation day.

Go to solution
The number is correct, and my socket is number 6 in that picture. It was working fine all day until 6pm.
0 Ratings
3,221 Views
Message 6 of 19

Re: No internet on activation day.

Go to solution

@Jedimaster wrote:
The number is correct, and my socket is number 6 in that picture. It was working fine all day until 6pm.

The NTE could have gone faulty, its not unknown.

They have a large number of electronic components which can fail.

You need to prove this by taking it apart, and plugging a microfilter into the "real" test socket as shown on this picture.

mk 3 nte all parts.jpg

Once you can see the test socket, then connect it up as shown below, and see if you still get the disconnections.

I assume your alarm system plugs into the same place as your phone, via some form of splitter?

infinity_test.jpg

0 Ratings
3,211 Views
Message 7 of 19

Re: No internet on activation day.

Go to solution
Same issue at the test socket. Solid orange light on the hub.
0 Ratings
3,207 Views
Message 8 of 19

Re: No internet on activation day.

Go to solution

@Jedimaster wrote:
Same issue at the test socket. Solid orange light on the hub.

Sounds like the home hub has failed. You could try a factory reset of the home hub.

0 Ratings
3,197 Views
Message 9 of 19

Re: No internet on activation day.

Go to solution

I have the previous version of the Smart Hub here that I was using with Plusnet until today. What do I need to type in the broadband username and password field if I want to try that hub instead?

 

Edit - I found the username. I can't connect with this hub either.

 

Edit 2 - I get this on the troubleshooting page. Clicking "link account to BT ID" doesn't do anything. 

Screenshot_20201022_204403_com.android.chrome.jpg

0 Ratings
3,178 Views
Message 10 of 19

Re: No internet on activation day.

Go to solution

As a matter of interest, what speed are you supposed to be getting?

Did anything in the house switch on at about the time you lost the connection?

The account linkage may take 24-48 hours to update, as there may be open orders still.

I am wondering also, if there is still a pending activation which could take up to midnight, and you were on an old profile.

It could also be that there is a network fault, so it may be worth checking on the BT Status website.

https://my.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=31

0 Ratings