cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Newbie
120 Views
Message 1 of 2

Slow speeds

We’ve been with BT for c. 10 months and are suffering increasingly from slow speeds, videos buffering, etc. We’re on BT’s up to 36 mb fibre package and generally get a good WiFi signal round the house and speeds routinely of c. 30 mb. So when things are working they are working pretty well. 
When we’re experiencing slow speeds, the WiFi connection seems to be stable and still shows close to or full signal. Am hoping someone may be able to check my stats and see if anything looks obviously amiss. Many thanks in advance. Pete

Product name:

BT Hub 6A

Serial number:

+084316+NQ91283451

Firmware version:

SG4B1000E020

Firmware updated:

01-Apr-2020

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

4 Days, 15 Hours 2 Minutes 45 Seconds

Data rate:

6.84 Mbps / 36.65 Mbps

Maximum data rate:

6836 / 36775

Noise margin:

6.4 dB / 3 dB

Line attenuation:

43.4 dB

Signal attenuation:

27 dB / 43.4 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

12 GB Uploaded / 91 GB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BT Home Network

2.4 GHz wireless channel:

Channel 11

5 GHz wireless network name:

BT Home Network

5 GHz wireless channel:

Channel 36

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

98:1E:19:E4:5D:39

 

0 Ratings
Reply
1 REPLY 1
Highlighted
Distinguished Sage
Distinguished Sage
102 Views
Message 2 of 2

Re: Slow speeds

your stats look ok with 36/6mb connection and noise margin down at 3db suggesting G.INP is active and giving a bit boost to connection speed  connection time is 4 days+ so connection appears stable



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.