cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Al2042
Beginner
280 Views
Message 1 of 5

Slow upload speeds on FTTC after fault fix

I am on Fibre 2 and getting good down speeds but my upload has been stuck at 1.1mbps for months. I had a general fault with slow speeds, but since that was 'fixed' I have had the upload speed issues.

BT Faults weren't any help as they don't guarantee upload speeds. Any idea what I can do to get it sorted? 

tempsnip.png

This is a list of your BT Smart Hub settings and current statistics.

Product name:

BT Hub 6A

Serial number:

+084316+NQ81493994

Firmware version:

SG4B1000E020

Firmware updated:

18-Dec-2020

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

0 Days, 0 Hours 29 Minutes 12 Seconds

Data rate:

1.28 Mbps / 77.61 Mbps

Maximum data rate:

1277 / 79754

Noise margin:

6.8 dB / 4.4 dB

Line attenuation:

22.5 dB

Signal attenuation:

8.7 dB / 22.5 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

5 MB Uploaded / 80 MB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-5F3C

2.4 GHz wireless channel:

Smart (Channel 11)

5 GHz wireless network name:

BTHub6-5F3C

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

AC:3B:77:D3:CC:37

Software variant:

-

Boot loader:

9.2.0

0 Ratings
Reply
4 REPLIES 4
pippincp
Sage
273 Views
Message 2 of 5

Re: Slow upload speeds on FTTC after fault fix

Your uptime is only 29 mins, you sure the fault's been fixed?

0 Ratings
Reply
Al2042
Beginner
269 Views
Message 3 of 5

Re: Slow upload speeds on FTTC after fault fix

Previously was up for 4/5 days. I just did a factory reset before posting
0 Ratings
Reply
imjolly
Distinguished Sage
Distinguished Sage
262 Views
Message 4 of 5

Re: Slow upload speeds on FTTC after fault fix

Looks łike you had a firmware update 4 days ago but from other posts it may be your firmware was reverted to a previous version because of problems



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
Al2042
Beginner
217 Views
Message 5 of 5

Re: Slow upload speeds on FTTC after fault fix

Do you think the firmware could be limiting my speeds? 

If it's a hardware issue I might just try a different router but I don't want to buy one and be stuck in  the same spot

0 Ratings
Reply