cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
985 Views
Message 1 of 4

broadband not at full speed

Hi

Having recently reporting a fault . I was told I was due an upgrade , so a new smart hub 2  (instead of the old hub and modem)  was sent out first to see if that was the problem , it wasn't , and  so an engineer was sent out , found a fault and replaced the cable to the house. all fine , no loss of connection since, but the speeds aren't as should be .

 this is what I'm supposed to have .

bt.jpg

I'm thinking it may be reduced because of the previous fault.( banded profile?)

I was told it may fluctuate for a week or 2 till it stabilised . but its been rock solid at the same speeds

stats from hub after a reboot

Product name,BT Smart Hub 2
Serial number,+091298+2020024054
Fireware version,v0.17.01.12312-BT (Mon May 11 18:49:53 2020)
Board version,R01
GUI version,1.56 15_02_2019
DSL uptime,0 days 0 Hours 1 Mins 3 Secs
Data rate,15.6 Mbps / 34.8 Mbps
Maximum Data rate,15.9 Mbps / 35.6 Mbps
Noise margin,6.2/6.2
Line attenuation,4.7/14.7
Signal attenuation,4.7/17.4
VLAN id,101
Upstream error control,Off
Downstream error control,Off
Data sent / received,883.3 KB Uploaded / 7.9 MB Downloaded
Broadband username,bthomehub@btbroadband.com
BT Wi-Fi,Active
2.4 GHz wireless network name,BT-3CAJ55
2.4 GHz wireless channel,Smart (Channel6)
5 GHz wireless network name,BT-3CAJ55
5 GHz wireless channel,Smart (Channel36)
Wireless Security,WPA2 (Recommanded)
Wireless mode,Mode 1
Firewall,On
MAC address,18:82:8C:27:F3:35
Software variant,-
Boot loader, 0.1.7-BT (Thu Nov 30 09:45:22 2017)

any help as to who to contact for assistance would be appreciated.

Thanks ,Dean

 

 

0 Ratings
3 REPLIES 3
975 Views
Message 2 of 4

Re: broadband not at full speed

from your stats you have a 34.8mb connection on an attainable line of 35.6mb so almost at max with noise margin about normal at 6db.  you are not in a banded profile

enter your phone number and post results  delete number but leave exchange and cab

https://www.broadbandchecker.btwholesale.com/#/ADSL



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
948 Views
Message 3 of 4

Re: broadband not at full speed

Hopefully this is correct.btcabinet.jpgbtcabinet.jpg

0 Ratings
941 Views
Message 4 of 4

Re: broadband not at full speed

sorry IMJOLLY I think I posted it twice , and didn't thank you for your reply,

that wasn't how I'd planned it....

 

Cheers,Dean

0 Ratings