cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Aspiring Contributor
74 Views
Message 31 of 32

Re: disconnect /SNR (dB)

I don't think this is enabled because it should be 6 dB and shouldn't drop that low because of how far away I am from the  FTTC which is a 1.75 miles away ( Copper line) and looking a my previses posts you will see it drops from 6-0 dB and disconnects.

But how do I know if this is G.INP enabled thanks?

0 Ratings
Reply
Highlighted
Distinguished Sage
Distinguished Sage
65 Views
Message 32 of 32

Re: disconnect /SNR (dB)

if on FTTC post hub stats  if hh5 then troubleshooting then helpdesk   if hh6 then advanced settings then technical log information
if you are on FTTC then it is possible for DLM to activate G.INP which drops noise margin to 3db while giving a boost in connection speed



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply