Forum Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
coreservers
Contributor

on ‎23-03-2021 17h28

507 Views
Message 1 of 3

smart hub2 7 disconnects since 1pm

Hi folks.

Normally relatively stable... but not today. so far 7 disconnects, Smart Hub2 light goes from Blue to Purple, then flashing orange, sits for a couple of minutes then comes back up.

Then within a couple of minutes it all happens again.  then stable for a couple of hours.... then we're off again.  Router states state disconnected. 

GUI version:1.71 05_06_2020
 

 

DSL uptime:0 days,00 Hours08 Mins43 Secs
 

 

Data rate:14.998 Mbps / 60 Mbps
 

 

Maximum data rate:23.863 Mbps / 73.445 Mbps
 

 

Noise margin:10.7 / 9.3
 

 

Line attenuation:6.6 / 12.9
 

 

Signal attenuation:6.6 / 14.1
 

 

VLAN id:101
 

 

Upstream error control:Off
 

 

Downstream error control:Off
 

 

Data sent / received:4.1 MB Uploaded  / 19.2 MB Downloaded
 

 

 
0 Ratings
2 REPLIES 2
imjolly
Distinguished Sage
Distinguished Sage

on ‎23-03-2021 17h31

504 Views
Message 2 of 3

Re: smart hub2 7 disconnects since 1pm

What have you tried to solve the disconnections?

try quiet line test to check for line noise by dialling 17070 option 2. Should be silent

tried connecting to test socket with filter to eliminate master faceplate and internal wiring?



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
coreservers
Contributor

on ‎23-03-2021 19h09

487 Views
Message 3 of 3

Re: smart hub2 7 disconnects since 1pm

Ok 

We dont have a master socket. just them old BT boxes. in fact a couple of years ago a BT engineer was here and had no idea where the master would be. as the cables are underground too.

But 17070 is silent, and ive manually fully powered the router down left it for 10 minutes and powered on. Was chatting to the neigbhours, and they were the same. so it seems to be either work at the exchange (Cogenhoe). or a line fault somewhere. 

0 Ratings