If my incoming line connects to a extension Telephone socket (not a master socket) terminals 2 and 5. And then I connect that socket to another extension, why can’t I get a dial tone/internet connection in the second socket?
Solved! Go to Solution.
Is the wiring connecting the two sockets new or was it already in situ?
If it’s the latter it could be that it’s faulty?
I assume you are connecting the wiring up the same at each socket, i.e. if it’s a standard colour code you’re connecting Pair One, which is Blue to 2 and White/Blue to 5.
Also what are you using to connect the wiring, is it a Krone Tool or are you just using something like a flat head screwdriver?
So my incoming line terminates on a extension socket (small square one, not a master socket), terminals 2 and 5. I then run a wire from those 2 terminals onto ANOTHER extension socket and terminate on terminals 2 and 5 (small square one, not a master socket). The terminals have screws so I have to screwdriver them in when terminating the wires on 2 and 5.