cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,053 Views
Message 1 of 4

FTTP and Digital Voice Migration

Go to solution

I currently have FTTP and a copper line supplying my phone service.

I have extension wiring with 3 other devices connected.

I am being migrated to digital voice and want to use my existing extension wiring.

is this possible?

can I connect the back of the SH2 to the existing faceplate with a cable male/male connector lead and run my devices as currently setup?

I have attached a photo of my current master socket faceplate, do I need to disconnect my copper line? Is the faceplate compatible with what I want to do?

many thanks

0 Ratings
Reply
3 REPLIES 3
1,044 Views
Message 2 of 4

Re: FTTP and Digital Voice Migration

Go to solution
0 Ratings
Reply
1,032 Views
Message 3 of 4

Re: FTTP and Digital Voice Migration

Go to solution

This has been covered on forum before. Disconnect the incoming openreach wiring from terminals A&B then wire as you are suggested from socket on SH2 to phone socket in master and extension sockets should work. Not sure if you will get caller display working on all extensions. Just need to try and see



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
1,025 Views
Message 4 of 4

Re: FTTP and Digital Voice Migration

Go to solution
that's really helpful imjolly thanks for your reply - much appreciated.
0 Ratings
Reply