Firstly apologies if this is not the right place to ask this, I have scoured the internet and can't seem to get the answer and wans't sure on the right forum.
Anyway recently moved into a flat and noticed the broadband isn't great (Maximum we can get is 15mbs). However not even touching that number. I have looked around the flat and noticed there are two BT Openreach sockets and a blank socket. The Openreach sockets look like NET5 sockets from what I can tell. As I understand there should really only be one master, could it be the case one of them is a slave? If so is there anyway to tell perhaps from the cableing?
This is the socket.
Thanks in advance if you're able to put me in the right direction
Can you see where the incoming openreach cable enters your home,? Master would be first socket
Or the master should have 2 wires connected to terminals A&B on back of master and extension connected to terminals 2&5 Are you a bt broadband customer?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.