cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Sinergy
Beginner
154 Views
Message 1 of 3

BT Home Hub 3 Slow LAN Home Network Wireless Speed (Under1mbps)

Hi there 🙂

My Home Hub 3 LAN Wireless speed has always been under 1mbps, but I am guessing that isn't the way it is supposed to be? I have looked through all the settings in the Hub Management, but can't see what I should be altering to make it faster. Is there some reason it is limited to that slow speed for my LAN wireless network?

Many thanks.

0 Ratings
2 REPLIES 2
Distinguished Sage
Distinguished Sage
145 Views
Message 2 of 3

Re: BT Home Hub 3 Slow LAN Home Network Wireless Speed (Under1mbps)

can you post stats from your hub 3

From http://192.168.1.254

Settings ->
Advanced Settings >
Broadband >
Connection >
Click "Show Details" Button at the bottom

You can also try the direct link

http://192.168.1.254/index.cgi?active_page=9116

run btspeedtster and when first test completes then run diagnostic test and post results  must be done with ethernet connection not wireless  http://www.speedtest.btwholesale.com/

there is no guaranteed speed for wireless connection

enter phone number and post results  delete number  https://www.btwholesale.com/includes/adsl/main.html



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Sinergy
Beginner
139 Views
Message 3 of 3

Re: BT Home Hub 3 Slow LAN Home Network Wireless Speed (Under1mbps)

ADSL Line Status Connection information
Line state: Connected
Connection time: 0 day, 03:27:08
Downstream: 2,592 Kbps
Upstream: 448 Kbps
ADSL settings VPI/VCI: 0/38
Type: PPPoA Modulation: G.992.1 Annex A Latency type: Interleaved
Noise margin (Down/Up): 6.5 dB / 15.0 dB
Line attenuation (Down/Up): 60.5 dB / 31.5 dB
Output power (Down/Up): 18.0 dBm / 12.3 dBm
FEC Events (Down/Up): 222493 / 105
CRC Events (Down/Up): 49 / 1 Loss of Framing (Local/Remote): 0 / 0 Loss of Signal (Local/Remote): 0 / 0 Loss of Power (Local/Remote): 0 / 0 Loss of Link (Remote): 0 HEC Errors (Down/Up): 197 / 1 Error Seconds (Local/Remote): 0 / 0

Phone Number Test: https://ibb.co/iPTQ4z


I can't do the wired ethernet test due to configuration of PC and hub, sorry. But the wired test shouldn't be relevant anyways to a wireless LAN issue, yes? It seems most of these test results pertain to my connection between the Hub and the exchange, not for my LAN? Many thanks.

0 Ratings