cancel
Showing results for 
Search instead for 
Did you mean: 
funkyskunky
Newbie
206 Views
Message 1 of 5

Customising Subnets on HH5

Go to solution

Hi, I am rejigging my network so i can get a home lab setup.

 

I have setup a 10.1.1.0 with 255.0.0.0 network up so Class A.

 

I have tried to setup the HH with the same range but i get an invalid address. Any ideas why?

 

 

0 Ratings
Reply
4 REPLIES 4
Distinguished Sage
Distinguished Sage
204 Views
Message 2 of 5

Re: Customising Subnets on HH5

Go to solution

The 10.xx private range is reserved on BT HHs for BTWiFi.

0 Ratings
Reply
Jonkarra
Expert
187 Views
Message 3 of 5

Re: Customising Subnets on HH5

Go to solution
Why would you need such a massive address space? And as already pointed out you can't use the 10/8 range as its reserved already.
0 Ratings
Reply
Highlighted
funkyskunky
Newbie
178 Views
Message 4 of 5

Re: Customising Subnets on HH5

Go to solution
Many thanks

0 Ratings
Reply
funkyskunky
Newbie
178 Views
Message 5 of 5

Re: Customising Subnets on HH5

Go to solution
I dont but i do have another network that has a 10.x range that i need to connect my VM's into. I was hoping to be able to mimic this network at home so i dont have to mess around flipping Ip addresses all the time....
0 Ratings
Reply