cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
lenphotographic
Aspiring Contributor
236 Views
Message 11 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

I tried that and it didn't work.  I get a WAN 1   IP address starting with 176. and according to the manual  its because the ISP has not accepted the username and password.

Any ideas.

 

len

 

0 Ratings
Reply
imjolly
Distinguished Sage
Distinguished Sage
233 Views
Message 12 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

The username and password are the same for all residential customers so must be something else setup incorrectly



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
licquorice
Distinguished Sage
Distinguished Sage
224 Views
Message 13 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

If there is a setting for VLAN id, it should be 101.

0 Ratings
Reply
aam
Contributor
194 Views
Message 14 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

Have a look at this:

https://www.draytek.co.uk/support/guides/vigor-2860-vdsl-setup

The screens and menus may vary a bit depending on the firmware version running on your router but on the whole it should be very similar to configure. 

0 Ratings
Reply
lenphotographic
Aspiring Contributor
181 Views
Message 15 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

Hi

 

thanks for that. I upgraded the firmware last night so will have another go tonight. Frustrating when it should be so easy.

 

cheers

 

Len

 

0 Ratings
Reply
lenphotographic
Aspiring Contributor
160 Views
Message 16 of 16

Re: DRAYTEK 2860LN ROUTER

Go to solution

Hi

 

Thanks for your great description. I updated the firmware and then followed your instructions. It worked.

I then set it up with Nord VPN as per draytek instructions and that worked too.

 

Cheers

 

Len

 

0 Ratings
Reply