cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tomkyn
Beginner
207 Views
Message 1 of 1

EdgeRouter X and IPv6 on BT Fibre

Is there any definitive guide on how to configure the router, in order to get a real IPv6 on the PPPoE interface?  The only thing the interface is assigned is IPv4 and a link local IPv6 address. 

DHCP clients within LAN do not get a real IPv6.  The only machine that can do ping6 and traceroute6 is the router itself.

The interfaces:

ethernet eth0 {
     description Bedroom
     duplex auto
     ipv6 {
         address {
             autoconf
         }
         dup-addr-detect-transmits 1
         router-advert {
             prefix ::/64 {
             }
         }
     }
     speed auto
 }
 ethernet eth1 {
     description Office
     duplex auto
     ipv6 {
         address {
             autoconf
         }
         dup-addr-detect-transmits 1
     }
     speed auto
 }
 ethernet eth2 {
     description Lounge
     duplex auto
     ipv6 {
         address {
             autoconf
         }
         dup-addr-detect-transmits 1
     }
     speed auto
 }
 ethernet eth3 {
     description "Powerline Feed"
     duplex auto
     ipv6 {
         address {
             autoconf
         }
         dup-addr-detect-transmits 1
     }
     speed auto
 }
 ethernet eth4 {
     description "Internet (PPPoE)"
     duplex auto
     firewall {
         in {
             ipv6-name WANv6_IN
             name WAN_IN
         }
         local {
             ipv6-name WANv6_LOCAL
             name WAN_LOCAL
         }
     }
     poe {
         output off
     }
     pppoe 0 {
         default-route auto
         dhcpv6-pd {
             pd 0 {
                 interface switch0 {
                     host-address ::1
                     prefix-id :0
         dhcpv6-pd {
             pd 0 {
                 interface switch0 {
                     host-address ::1
                     prefix-id :0
                     service slaac
                 }
                 prefix-length /56
             }
             rapid-commit enable
         }
         firewall {
             in {
                 ipv6-name WANv6_IN
                 name WAN_IN
             }
             local {
                 ipv6-name WANv6_LOCAL
                 name WAN_LOCAL
             }
         }
         ipv6 {
             dup-addr-detect-transmits 1
             enable {
             }
             router-advert {
             }
         }
         mtu 1492
         name-server auto
         password BT
         user-id bthomehub@btbroadband.com
     }
     speed auto
 }
 loopback lo {
 }
 switch switch0 {
     address 10.0.0.1/22
     description Local
     ipv6 {
         dup-addr-detect-transmits 1
         router-advert {
             cur-hop-limit 64
             link-mtu 0
             managed-flag true
             max-interval 600
             other-config-flag false
             prefix ::/64 {
                 autonomous-flag true
                 on-link-flag true
                 valid-lifetime 2592000
             }
             reachable-time 0
             retrans-timer 0
             send-advert true
         }
     }
     mtu 1500
     switch-port {
         interface eth0 {
         }
         interface eth1 {
         }
         interface eth2 {
         }
          interface eth3 {
         }
         vlan-aware disable
     }
 }

 

0 Ratings
Reply