cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
595 Views
Message 1 of 11

HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

My HH6 shows 3 Devices on port 1 when only 1  is connected. I would think the top one is my BT TV box . But what would the two gaming consoles be as i only have the TV plugged into Port 1.

 

Any ideas

 

thanks

MikeHH6.png

 

 

Mike
Tags (3)
0 Ratings
Reply
10 REPLIES 10
Liam_
Expert
582 Views
Message 2 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

Going by the MAC addresses the first item is the HUMAX, the other two come back as something from the SHENZHEN GONGJIN ELECTRONICS CO.  They apparently make all sorts of Communications equipment.

You could look here and see if you have something they make.

 

**edited by mod**

0 Ratings
Reply
smf22
Recognised Expert
578 Views
Message 3 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

Judging by the Int6400 in the name I'd suggest INT6400/INT1400 HomePlug AV Chip Set.

0 Ratings
Reply
Distinguished Sage
Distinguished Sage
575 Views
Message 4 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

Do you have powerline adaptors?

0 Ratings
Reply
551 Views
Message 5 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

Agree the box is a HUMAX but that port has never had anything else plugged into it since I have had the HH6. Can i delete the ones I don't know

The bigger question would be how the got there.

Mike
0 Ratings
Reply
548 Views
Message 6 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

yes i do have powerline adapters which is plugged into Port 1 to feed the HUMEX box 

Mike
0 Ratings
Reply
Distinguished Sage
Distinguished Sage
545 Views
Message 7 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

@thewheelshavecomeoff wrote:

yes i do have powerline adapters which is plugged into Port 1 to feed the HUMEX box 


That will be the other two devices that you see.

0 Ratings
Reply
541 Views
Message 8 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

looking at the link as was suggested in the next post it could be the power line adapters. 

Mike
0 Ratings
Reply
539 Views
Message 9 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

That looks like the answer

Mike
0 Ratings
Reply
Distinguished Sage
Distinguished Sage
538 Views
Message 10 of 11

Re: HH6 shows 3 Devices on port 1 when only 1 is connected.

Go to solution

It is your powerline adaptors. Switch them off and they will show as not active.