cancel
Showing results for 
Search instead for 
Did you mean: 
dgilbert2
Expert
1,103 Views
Message 1 of 8

Home Hub 3 Firmware

Go to solution

My Hub 3 firmware is;

 

V100R001C01B031SP09_L_B

 

and has been powered up for over a week now.

 

I see there is now a SP12 version around, my question is has anyone on ADSL received this latest version or do you only get it if on Infinity?

0 Ratings
Reply
7 REPLIES 7
grampy
Aspiring Contributor
1,060 Views
Message 2 of 8

Re: Home Hub 3 Firmware

Go to solution

I have Option 1 ADSL2 and my Hub 3 updated automatically on July 31 to new firmware (serial no ends SP12). Although one is supposed to leave the Hub on 24Hr I don't, and it happened wiithin 10 minutes of switching on at noon.

0 Ratings
Reply
dgilbert2
Expert
1,053 Views
Message 3 of 8

Re: Home Hub 3 Firmware

Go to solution

Thanks grampy for you reply and clarifcation. I must learn to be patient! Perhaps I'm leaving mine switched on too long Smiley Very Happy

 

(only joking!!)

0 Ratings
Reply
Distinguished Sage
1,038 Views
Message 4 of 8

Re: Home Hub 3 Firmware

Go to solution
just leave it turned on it will upgrade automatically
0 Ratings
Reply
dgilbert2
Expert
986 Views
Message 5 of 8

Re: Home Hub 3 Firmware

Go to solution

Sorted - router has now been updated to SP12. Thanks for the replies.

0 Ratings
Reply
Distinguished Expert
Distinguished Expert
974 Views
Message 6 of 8

Re: Home Hub 3 Firmware

Go to solution

@dgilbert2 wrote:

Sorted - router has now been updated to SP12. Thanks for the replies.


There is another thread on this subject, but there is also another post concerning "clocks forward" today, on HH3 Type A.

I don't follow every single thread, BUT, does the HH3 Type B now show the correct time, i.e. BST?

 

Just curious - it's not a serious issue.

 

0 Ratings
Reply
dgilbert2
Expert
971 Views
Message 7 of 8

Re: Home Hub 3 Firmware

Go to solution

The router does seem to be displaying the correct time.

Distinguished Expert
Distinguished Expert
964 Views
Message 8 of 8

Re: Home Hub 3 Firmware

Go to solution

@dgilbert2 wrote:

The router does seem to be displaying the correct time.


Thanks!

It's not quite an obsession, but I'm puzzled as to why some hubs do and others don't display the correct time at BST.

My HH2 Type A also shows the correct time.

 

Assuming that all hubs use the same time server, then each version of hub contains a calendar built in to the firmware - if you see what I am driving at.

(My central heating timer has a calendar built in to its firmware, and unfortunately it cannot be changed. It will need replacing if BST becomes permanent over Winter.)

 

So you can see the advantages of online updates.

Incidentally I am also on ADSL2.

0 Ratings
Reply