cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,813 Views
Message 1 of 6

Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution

I've just upgraded to the Smart Hub 2 and noticed all my devices have been added with IP address reservation i.e. "Always use this IP address" enabled for every device.  Is this normal?

0 Ratings
5 REPLIES 5
1,801 Views
Message 2 of 6

Re: Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution

Apparently. It seems to do that on my hub.

0 Ratings
1,799 Views
Message 3 of 6

Re: Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution

Ok, thanks for confirming.  Feels like there should be a global setting somewhere to control the default behaviour, but I can't see one.

0 Ratings
1,788 Views
Message 4 of 6

Re: Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution

There isn't. Not sure why its a problem though.

0 Ratings
1,784 Views
Message 5 of 6

Re: Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution
Agreed, unlikely to be an issue for 99% of users, but it's definitely atypical behaviour. I've never seen any device (home or enterprise) auto reserve an IP as soon as it's assigned.
0 Ratings
1,774 Views
Message 6 of 6

Re: Smart Hub 2 - Always use this IP address - Defaulting to Yes

Go to solution

True, but as the BT home hub is aimed at the mass market, I guess they think they are helping by giving users consistent IP addresses. Although I suspect that even if you disable address reservation the hub will still issue the same address each time!

0 Ratings