cancel
Showing results for 
Search instead for 
Did you mean: 
varkanoid
Aspiring Expert
4,120 Views
Message 1 of 4

My Ultra HD box gets stuck on "Nearly Ready" since H26.40.0 with SMART on

Go to solution

Since the update to 26.40.0 and when SMART is enabled my Ultra HD box gets stuck on the YouView "Nearly Ready" screen. I have left it for over an hour and it just sits there. The only way I can get it to turn on is to switch it off using the switch at the back several times. Anyone else having this problem ?

 

I have a normal HD Box which had the update 26.40.0 ages ago and this is set to SMART and it wakes up fine.

 

 

 

 

0 Ratings
Reply
3 REPLIES 3
Highlighted
4KMarty
Aspiring Expert
4,115 Views
Message 2 of 4

Re: My Ultra HD box gets stuck on "Nearly Ready" since H26.40.0 with SMART on

Go to solution

@varkanoid wrote:

The only way I can get it to turn on is to switch it off using the switch at the back several times. Anyone else having this problem ?

 


No. Mine's working fine. 

0 Ratings
Reply
rarmitage124
Recognised Expert
4,099 Views
Message 3 of 4

Re: My Ultra HD box gets stuck on "Nearly Ready" since H26.40.0 with SMART on

Go to solution
Have you tried a maintenance mode reset:

https://community.youview.com/youview/topics/top_tip_soft_reset_reboot_power_cycling_maintenance_mod...

Hopefully that helps, if not post back

If my post has been useful, please click on the Ratings star on the left-hand side of the post.

If I have answered your question correctly please let me know by clicking on ’Mark as Accepted Solution' Thanks
varkanoid
Aspiring Expert
4,065 Views
Message 4 of 4

Re: My Ultra HD box gets stuck on "Nearly Ready" since H26.40.0 with SMART on

Go to solution

I did the mainenance mode reset and it seems to have done the trick.

0 Ratings
Reply