cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Distinguished Guru
2,200 Views
Message 11 of 14

Re: 'One for All' universal remote and DTR2100 BT/Youview box?

Go to solution

One correction:

 

URC-7541 as shipped seems to support both 0283 and 0863.

URC-7562 as shipped seems to support only 0863 as far as I can tell.

 

Neither of those models as shipped support 1176 or 3140 as far as I can tell.

 

NOTE: 0863 has many key positions jumbled on those two models and would need most keys re-assigning, or a more permanent memory update applied.

0 Ratings
Reply
Highlighted
Newbie
1,869 Views
Message 12 of 14

Re: 'One for All' universal remote and DTR2100 BT/Youview box?

Go to solution
Help we're is the delete button on the urc 7-40 Thanks
0 Ratings
Reply
Highlighted
Beginner
1,825 Views
Message 13 of 14

Re: 'One for All' universal remote and DTR2100 BT/Youview box?

Go to solution

@Edd23 do you mean URC-7940?

 

If so you need to assign the function to one of the keys on the remote. When you look at the original BT Youview you will see that subtitle & delete share the same button.

 

You just need to do this, assuming SAT is used for the BT box. If VCR is being used then replace SAT with VCR below

 

1 Press the SAT device key.
2 Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3 Press 9 9 4. The red LED underneath the POWER key will blink twice.
4 Press the M (MAGIC) key once.
5 Enter the 5-digit function code (00166).
6 Press the key to which the function will be assigned, for example -/--.
7 The SAT device key will blink twice.

 

An online copy of the URC-7940 manual can be found here

http://tv.manualsonline.com/manuals/mfg/one_for_all/urc7940.html

 

If your one for all remote is another model the sequence of keys could be different.

 

0 Ratings
Reply
Highlighted
Newbie
1,681 Views
Message 14 of 14

Re: 'One for All' universal remote and DTR2100 BT/Youview box?

Go to solution
Just wanted to say thanks for the information, whilst I have known for a long time how to add functions I didn’t know what the 5 digit codes were, to my knowledge the only way to obtain them is to open a support ticket with OFA, so just a thanks for saving me some hassle.
0 Ratings
Reply