Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
5 results
Sorted by:
21-10-2023
12h12
Been using AC2600 for a few years and just swapping to AX6600 setup. I don't appear to be able to see the DLNA services from home box any longer. I can reach the box admin page without issue via W...
11-02-2021
11h11
My new upgrade is through and I wanted to check a few things I wasn't sure of. When I connect ethernet in to hub it indeed shows full speed. I can get a respectable 400 down 100 up on Wifi which do...
11-02-2021
21h20
I recently upgraded to 900 FTTP with Smart Hub 2. My wifi speeds are fine at 400 but my ethernet speeds are wrong and I can't work out why. At first I thought it was maybe old devices but on testin...
01-05-2022
9h02
...ocal, none cloud devices, like a printer, a DLNA media server, some MQTT sensors, Laptops.... After some debug it turns out that the SmartHub had stopped responding to DHCP requests and also stopped n...
18-10-2022
19h07
...rinter sharing is ON DLNA and SAMBA is ON Public subnet is OFF UPnP is ON DHCPv4 Server is ON IPv6 is ON IPv6 ULA is OFF Address pool goes from 192.168.1.2 to 192.168.1.199 The IP addresses t...