cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
795 Views
Message 1 of 9

Digital voice

Go to solution

Installed Smart Hub 2 & DV Adapter - all ok but:

Adapter doesn't go to solid green when paired, is this faulty or can only be solid once I'm switched to DV?

Set up refers to base pin default 000. I haven't changed this as I cannot see it on my Hub Manager. The only option seen is to change admin password - where is the option to change this 4 digit base code?

Thanks Ray

 

 

0 Ratings
Reply
8 REPLIES 8
791 Views
Message 2 of 9

Re: Digital voice

Go to solution

normally the adapter does not pair until DV is active on SH2  you can check by going to hub manager and should see phone number and whether active or not



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
778 Views
Message 3 of 9

Re: Digital voice

Go to solution

DECT base PINs are usually set from a handset paired to that base, in this case the SH2. If you don't have a BT DV handset paired then I'd suspect it can't be changed.

740 Views
Message 4 of 9

Re: Digital voice

Go to solution
thank you, do you have an answer to the 2nd question re DV Adaptor?
0 Ratings
Reply
731 Views
Message 5 of 9

Re: Digital voice

Go to solution

Which second question would that be? Both questions have been answered.

0 Ratings
Reply
728 Views
Message 6 of 9

Re: Digital voice

Go to solution

Afraid not beyond what @imjolly has already posted. But maybe try it in the same room as the SH2, just to rule out a range issue.

719 Views
Message 7 of 9

Re: Digital voice

Go to solution
Thank you
0 Ratings
Reply
713 Views
Message 8 of 9

Re: Digital voice

Go to solution
thank You
0 Ratings
Reply
712 Views
Message 9 of 9

Re: Digital voice

Go to solution
yes, second question also answere
0 Ratings
Reply