Forum Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mickbaugh2
Aspiring Contributor

on ‎07-06-2020 12h19

2,179 Views
Message 1 of 8

My FTTP cable has been damaged by a tree, mini hub woe’s

5 days ago, an FTTP fibre cable that supplies my street was snapped by a falling tree, about 400m away from my house. BT have sent me a mini hub as I have ‘Fibre 250 with BT Halo 1’

This little device uses a 4G sim to provide an internet connection, you can connect to the mini via WI FI or USB

My problem is that 90% of the internet-connected devices in my house are connected to a Netgear Switch that is connected to my Smart Hub 2 via cat 7 Ethernet cables, having WIFI via the mini is not going to help those devices. Has anyone managed to bridge the internet connection that the Mini has to their original network? If so, how did you do it?

I was hoping that the Smart Hub 2 would play nicely with the mini Hub when the mini was plugged into the USB port at the back of the Smart Hub. No such luck

0 Ratings
7 REPLIES 7
licquorice
Distinguished Sage
Distinguished Sage

on ‎07-06-2020 12h25

2,174 Views
Message 2 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

I suspect the only way you will be able to do it is to buy a WDS capable device with an Ethernet port to bridge the mini hub to your network.

0 Ratings
Anonymous
Not applicable

‎07-06-2020 12h42 - edited ‎07-06-2020 12h50

2,158 Views
Message 3 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

The Netgear EX6000 Wi-Fi repeater uses both 5 and 2.4ghz.

If you want to, you can set it to connect to the 4g hub using the 5GHz band and connect your devices to the 2.4 GHz carrier. Netgear call this configuration Fastlane and the 5GHz carrier is used exclusively for connection to the hub, meaning only the 2.4GHz band will be available for your devices.

EDIT: I forgot to add that it also has an ethernet port that your switch could connect to

V_Meldrew_0-1591530358083.jpeg

 

0 Ratings
licquorice
Distinguished Sage
Distinguished Sage

on ‎07-06-2020 12h51

2,145 Views
Message 4 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

How is that going to provide Ethernet capability, its just a wifi repeater?

0 Ratings
Anonymous
Not applicable

on ‎07-06-2020 12h52

2,143 Views
Message 5 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

@licquoricewrote:

How is that going to provide Ethernet capability, its just a wifi repeater?

No it's not, see the edit in my previous post

licquorice
Distinguished Sage
Distinguished Sage

on ‎07-06-2020 13h02

2,124 Views
Message 6 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

Posted before your edit. Yes, a suitable device.

Anonymous
Not applicable

on ‎07-06-2020 13h06

2,117 Views
Message 7 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

It wont be superfast, I think it has a limit of 6 devices connecting at any one time, but it will do as you ask.

http://www.downloads.netgear.com/files/GDC/EX6000/EX6000_UM_3sep2015.pdf

0 Ratings
mickbaugh2
Aspiring Contributor

on ‎11-06-2020 9h32

2,060 Views
Message 8 of 8

Re: My FTTP cable has been damaged by a tree, mini hub woe’s

Thanks for the suggestions, I didn't want to buy new hardware for what I thought was going to be a 3 or 4 day outage. Openreach have now said they will hopefully replace the broken cable on the 15th of June 2020. 13 days after the initial fault report.

As for the BT mini-hub, in my opinion, it's a poor solution. It would've been infinitely better if the Smart Hub 2 could take a 4G SIM directly, as the DrayTek Vigor 2862 can, or allow WAN access via the mini-hub plugged into the USB port of the SH2

I did also try internet sharing and network adaptor bridging in windows 10. I couldn't get it to work as I needed

I suppose this incident reminds me just how good FTTP is... when it's working.

0 Ratings