cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
752 Views
Message 1 of 2

Recombine 2.4 and 5Ghz bands

Go to solution

I have a bt smart hub 6, and I managed to split the 2.4 and 5ghz bands by changing the name of the 5ghz band. After I changed it, I wanted to revert what I had just done, but whenever I try and change the name back, it always forcefully adds a "-5" on the end. I have tried looking for a separate bands button, however I cannot find it. Any help would be appreciated.

Thanks,

0 Ratings
1 REPLY 1
732 Views
Message 2 of 2

Re: Recombine 2.4 and 5Ghz bands

Go to solution

The easiest way is just to factory reset by pressing the recessed button on the back and holding 20/30 secs until lights flash.  Remember turn off smart setup after reset



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings