After setting “Always use this IP address” to YES, the Hub reports that a DHCP reservation has been saved, displaying the green “Changes saved” confirmation. However, after leaving and reopening the device’s settings page, “Always use this IP address” reverts to NO.
For clarity, I am only trying to reserve the IP already assigned by the Hub through DHCP, as confirmed by the Wireshark packet capture in the video below.
Video: Link to follow in a reply, in case it triggers the spam filter.
How to Reproduce
1. Ensure the device’s IP assignment is set to Automatic (DHCP) on the device itself.
2. Open 192.168.1.254 in a web browser.
3. Go to Advanced settings, enter the Hub’s admin password, then select My network.
4. Select the device from the list.
5. Set “Always use this IP address” to YES.
6. Wait for “Changes need to be saved”, then click Save.
7. The Hub displays the green “Changes saved” message.
8. Leave the device’s settings page, then reopen it. The setting has reverted to NO.
Specific Examples
Example 1 - Brother DCP-L2620DW printer (brand new - purchased 2026)
A brand-new printer, purchased in 2026, was unboxed and connected to a friend's network using WPS:
On the printer: Menu → Network → WLAN(Wi-Fi) → WPS/PushButton.
On the Hub: press the WPS button.
After the printer connected, I followed the reproduction steps above. The reservation setting reverted to NO after saving.
Example 2 - Windows 11 Pro
Tested on a physical PC using an Intel I226-V Ethernet adapter, with the original network adapter disconnected.
IP assignment was set to Automatic (DHCP) under:
Settings → Network & internet → Ethernet → IP assignment
The PC received 192.168.1.174 from the Hub at 192.168.1.254. Following the same reproduction steps produced the same result.
See the video linked above.
Example 3 - Newly created Linux Virtual Machine
Tested with a newly created Linux VM in virt-manager/QEMU/KVM, using DHCP and an automatically generated, persistent MAC address.
Following the same reproduction steps again caused the setting to revert to NO.
Additional Logs/Troubleshooting
For the Windows 11 Pro test, I used Wireshark to capture the complete DHCP Discover → Offer → Request → ACK exchange. This provides evidence that the PC obtains its address through DHCP.
I also recorded a video showing the configuration process, the successful save confirmation and the setting reverting afterwards. The video includes the Hub’s settings.
I work in IT and have reproduced this behaviour on two separate Smart Hub 2 units at different properties in different cities. The Brother printer example was at a friend’s house; the other tests were on my own Hub.
Workaround
Setting an unused static IP address directly on the printer, outside the Hub’s default DHCP pool (for example, within 192.168.1.1 - 192.168.1.63), works.
However, this requires additional manual configuration on the printer. The Hub’s reservation feature should retain the setting when it reports that the change has been saved.
