cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
414 Views
Message 1 of 3

SmartHub2 Tech log weird?

FTTC here no problems apart from Hub on a 12 day cycle.

'They' vary the speed by about 0.2 Mb up and down going round and round in circles. Ho-hum.

Version - v0.31.00.10253-BT

Data rate - 6.495 Mbps / 47.075 Mbps

What on earth is this though?

Full Fibre (FTTP) Mode:On🙄

David

 

0 Ratings
Reply
2 REPLIES 2
409 Views
Message 2 of 3

Re: SmartHub2 Tech log weird?

the SH2 is now dual purpose and can now be used on FTTP with that switched to on creating a WAN port and should be off when used with FTTC 



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
408 Views
Message 3 of 3

Re: SmartHub2 Tech log weird?


@DavidCo wrote:

FTTC here no problems apart from Hub on a 12 day cycle.

'They' vary the speed by about 0.2 Mb up and down going round and round in circles. Ho-hum.

'They' don't do anything. Th laws of physics might, however.

Version - v0.31.00.10253-BT

Data rate - 6.495 Mbps / 47.075 Mbps

What on earth is this though?

Full Fibre (FTTP) Mode:On🙄

It changes LAN port 4 to a WAN port for FTTP. Previously there were 2 variants of the hub, one with 3xLAN + 1xWAN and the other with 4xLAN. Now the port is changed in software.

David

 


 

0 Ratings
Reply