cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
3,940 Views
Message 11 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

All you need to do is temporarily turn off the 5ghz WiFi until you have connected the devices and then turn it back on again.

0 Ratings
Reply
3,807 Views
Message 12 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

... According to my hub I have 6 devices connected to my wifi discs, the only problem is that I don't have any discs....

 

Check your neighbours....

0 Ratings
Reply
3,432 Views
Message 13 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

I have the following just updated

v0.38.00.10147-BT  which says on the router the following date  Tue Feb 7 16:35:54 2023

Any advance on this?

Chris

 

0 Ratings
Reply
3,401 Views
Message 14 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution
Still running v0.37.00.07084-BT following FTTP install in October.
0 Ratings
Reply
3,392 Views
Message 15 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

If you reboot the hub it should download the latest firmware, mine did.

Firmware version:v0.38.00.10147-BT
Firmware updated:Thu Feb 9 00:22:18 2023
0 Ratings
Reply
3,291 Views
Message 16 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

Interesting note here logged into technical log and noted that firmware had stated it was updated today but still reporting v0.37.* and my "DSL" uptime was still over 7 days so obviously not rebooted.

When reviewing the event log found the following -

07:24:41, 17 Feb. Image validation is successful.

07:24:08, 17 Feb. Hub is waiting to apply new firmware.

07:24:08, 17 Feb. download firmware image success

07:24:08, 17 Feb. CWMP: Download status=OK

07:24:08, 17 Feb. CWMP: Download File, File type:1 Firmware Upgrade Image, File Name: BT_hh6dx_drop38.bin.bt.signed, Username=, CommandKey=

So the update is downloaded and pending install at next reboot so appears not that case it will automatically reboot once downloaded.

0 Ratings
Reply
3,220 Views
Message 17 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution

Mine downloaded v0.38.* on the 17th Feb and was pending install showing 120 days uptime (no reboot every 2 weeks for me!). Automatic reboot today (18th Feb) in the early hours and now showing just a few hours uptime as expected with v0.38 active.

Anyone spot any changes from v0.37 to v0.38 ? There is now a QR code on the "Advanced wireless" page for each wirless band, but that may have been there previously and I just didn't spot it.

Only other, possibly co-incidental, change is that my Hybrid EE modem has gone from "one bar" and poor signal strength to "two bars" and good signal strength.  Haven't moved my modem, but signal may have improved iresepective of firmware change.

 

0 Ratings
Reply
3,191 Views
Message 18 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution
Just checked my still v0.37.* and although my wireless is typically disabled fully I enable and can see the mini QR code on each band which when click do enlarge which is useful to remember if you had a complex password.
0 Ratings
Reply
3,062 Views
Message 19 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution
Any ideas what the v0.38.00.20147 does? I can't see any noticeable differences!
Tags (2)
0 Ratings
Reply
1,814 Views
Message 20 of 24

Re: Smarthub 2 Firmware latest version?

Go to solution
I've just installed a purchased SH2 from that well known auction site and it has updated to v0.41.01.10137-BT
0 Ratings
Reply