Hi!
I have had BT digital voice turned on today and want to add my existing phone with 4 handsets and all the saved number - can I? It is a Panasonic KX-TG6824EB
BT have supplied me with two new Digital Voice phones but as I currently have four handsets, I think I will miss having easy access to a call, not to mention losing all the stored numbers!
Thanks
Solved! Go to Solution.
as already posted here just connect the existing cable which goes from base station to phone socket on wall so the base now connects to the phone socket on back of SH2
you need to check that digital voice is active - enter 192.168.1.254 into your browser address bar and that should take you to hub admin and now enter admin password not wifi shown on back of hub pullout.
now check that your phone number is not greyed out if greyed out then you need to wait until changes colour showing active then socket on hub will work
As already stated, you need to plug your Panasonic base station into the green phone socket at the rear of the hub.
You cannot sync the Panasonic with your Digital Phones or the hub.
DV contacts are entered via the handset but are stored on the hub. Once you have entered them all, I recommend that you take a backup as the contacts will be lost if you factory reset the hub for any reason. There is a backup and export function within the hub settings.
Your existing base unit should connect to the green socket on the back of the SH2