Just got my superfast 900mb installed today. Had been using the Asus DSL-AX86u on Plusnet ADSL previously straight from the phone line. Tried setting up to replaces the hub 2 with the Asus. Ran the red ethernet cable from the little wall ONT to the WAN port on the Asus similar to the hub 2 setup and entered the WAN DSL settings and inputted the username and password as listed into the forums. Still not detecting the connection, tried a few settings but was looking for a guide from start to finish to ensure I'm doing it correctly.
Solved! Go to Solution.
This is what mine looks like on the AX88, have you power cycled the router since changing over to FTTP?
Thank you, you're a legend. Settings helped. Turns out it was the Dual Wan tab in the same section. Had to set it on and switch WAN to primary connection and DSL to secondary after a few minutes it detected the connection and worked.