cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,629 Views
Message 1 of 6

Connect usb drive to hub for networking

Have plugged usb drive into hub and is showing in Hub Manager but cannot access it via File explorer Network tab. Is there a setting I need to activate or something I need to do to enable the drive to be visible. Am using Windows 11 and the drive is plugged into the USB slot on Smart Hub 2

0 Ratings
Reply
5 REPLIES 5
2,623 Views
Message 2 of 6

Re: Connect usb drive to hub for networking

Map a network drive letter to \\192 168.1.254\usb1

You will also need to enable SMB1 as it is disabled by default in W11

0 Ratings
Reply
2,591 Views
Message 3 of 6

Re: Connect usb drive to hub for networking

Hi Disc shows in Hub manager but not in File explorer, type in to map network drive in run command and says SMB1 not enabled. How do I enable SMB1 so can map the drive ?
0 Ratings
Reply
2,587 Views
Message 4 of 6

Re: Connect usb drive to hub for networking

2,426 Views
Message 5 of 6

Re: Connect usb drive to hub for networking

You may not be able to enable SMB1 in Win11 as SMB1, I think, is a security risk and may not be available in Win11

 

https://learn.microsoft.com/en-us/windows-server/storage/file-server/troubleshoot/detect-enable-and-...

0 Ratings
Reply
2,417 Views
Message 6 of 6

Re: Connect usb drive to hub for networking

It is disabled by default but is available.

I currently access an external drive connected to the usb port of my hub from a W11 laptop.

0 Ratings
Reply