cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,364 Views
Message 1 of 6

DrayTek 130 Setup Issues

Hi I'm trying to replace the home hub with a DrayTek 130 modem as suggested elsewhere as a good alternative. I am running the BT firmware on it and the physical connection is showing as good but WAN not connected. Any suggestions?

Screenshot 2022-03-29 at 18.54.43.pngScreenshot 2022-03-29 at 18.55.17.png

Tags (2)
0 Ratings
Reply
5 REPLIES 5
1,356 Views
Message 2 of 6

Re: DrayTek 130 Setup Issues

Are you trying to use the 130 as a modem or a modem/router?

0 Ratings
Reply
1,351 Views
Message 3 of 6

Re: DrayTek 130 Setup Issues

As a modem, I have a Nest WiFi ready to battle through issues with that once I have got the Draytek connected

0 Ratings
Reply
1,336 Views
Message 4 of 6

Re: DrayTek 130 Setup Issues

Then surely the WAN port won't be required, you connect the nest router to the LAN port. You need to set the VLANid to 101 somewhere on the Draytek (no idea where that setting is as I haven't got a Draytek)

0 Ratings
Reply
1,332 Views
Message 5 of 6

Re: DrayTek 130 Setup Issues

Found this thread over on Kitz, might be of help https://forum.kitz.co.uk/index.php/topic,21902.msg377609.html#msg377609

0 Ratings
Reply
1,316 Views
Message 6 of 6

Re: DrayTek 130 Setup Issues

Set to 101 and I'll check through the stuff in the other forum see if I get any joy thanks

0 Ratings
Reply