cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
788 Views
Message 1 of 2

Hub 6A showing very brief but very frequent "The LAN DHCP Server is inactive"

Can I ask if this is a know issue? I don't remember seeing this before.

My Hub is on firmware SG4B1000E079 updated on 20-May-2022.

Wondering if related to firmware update?

Tried a factory reset but no change.

An example from the event log is shown below.

TIA.

12:20:16, 03 Jul. :The LAN DHCP Server is active

12:20:16, 03 Jul. :The LAN DHCP Server is inactive

12:18:16, 03 Jul. :The LAN DHCP Server is active

12:18:16, 03 Jul. :The LAN DHCP Server is inactive

12:18:06, 03 Jul. :The LAN DHCP Server is active

12:18:06, 03 Jul. :The LAN DHCP Server is inactive

12:15:50, 03 Jul. :The LAN DHCP Server is active

12:15:50, 03 Jul. :The LAN DHCP Server is inactive

12:15:34, 03 Jul. :The LAN DHCP Server is active

12:15:34, 03 Jul. :The LAN DHCP Server is inactive

12:15:23, 03 Jul. :The LAN DHCP Server is active

12:15:23, 03 Jul. :The LAN DHCP Server is inactive

0 Ratings
Reply
1 REPLY 1
731 Views
Message 2 of 2

Re: Hub 6A showing very brief but very frequent "The LAN DHCP Server is inactive"

Having investigated this further, it seems to be caused by an IP camera. If I depower the camera the issue stops.

I have checked that DHCP is turned off on the camera.

As far as I am aware this is not causing any problems on my network, but I am interested as to why this is happening?

0 Ratings
Reply