IP Address not accessible

[Always_online]

For some reason I'm not able to access a server on 192.168.1.253

The router/home network is 192.168.1.0/24

DHCP pool is 192.168.1.64 - 253

The servers IP (and subnet) is static, ie.not assigned by the hub.

I realise the address is inside the DHCP lease pool, but it's not assigned to anything. It's there any reason I should not be able to access it?

Any help would be really appreciated!

[rbz5416]

---

@Always_onlinewrote:

The router/home network is 192.168.1.0/24

---

Don't understand this, do you mean you've changed the address of the Hub? If so I'm not sure 0 is a valid address.

Obvious things to try are limiting the DHCP pool to 250 or changing the server address to below 64.

[licquorice]

Probably no consolation, but I have given a device an address of 192.168.1.253 in the past with no problems without changing the DHCP pool.

@rbz5416 that is the correct way to describe the OP's subnet.

[rbz5416]

@licquorice 

I understand the /24 notation being a binary representation of 255.255.255.0 subnet but not the 192.168.1.0 IP address?

[licquorice]

It's just the start address of the subnet, and is a valid address in itself.

[Les-Gibson]

Has the server previously used any other IP address? 

Try IPconfig /release, IPconfig /flushdns and IPconfig /renew