cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
335 Views
Message 1 of 2

Passwords

I am unable to use password override  'invalid password override section'. please make sure the light is blinking. 

The light is blinking however whatever password i put in, it just wont accept it

I gave up with the above and decided too hard reset the router.   I put a pin in the reset hole and pushed and can hear a click for 3 seconds however nothing happens with the router. ive tried it several times. 

All i want to do is turn off 5ghz so that my new 2.5ghz device connects

0 Ratings
Reply
1 REPLY 1
326 Views
Message 2 of 2

Re: Passwords

When you do factory reset and push pin in back you need to hold for 20/30 seconds until the hub lights flash otherwise it does not reset



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply