I have a Smart Hub 2 and following a visit by an engineer was advised to ditch Powerline adapters which can compromise performance and go for a WiFi mesh system instead.
I did consider the BT Whole Home Mesh Wi-Fi system. As these disks only have one Ethernet port I have looked around and wonder if the Netgear system would be better as the Orbi router has 3 LAN Gigibit Ethernet ports, and the satellite unit has 2 Ethernet ports.
Also the Netgear system uses WiFi 6, which the BT devices do not. I would not want to use the Netgear router as a router.
Am I likely to run into problems if I use the Netgear system or is it as simple to set up and use as it appears to be?
try using search facility for Netgear Orbi
here is one result from many
https://community.bt.com/t5/Home-setup-Wi-Fi-network/Netgear-Orbi-Mesh-SmartHub/m-p/2245024
Thanks, I did try a search and did not find anything which seemed relevant.
The link which you posted relates to someone who has FTTP. I have copper wire connecting to my home so the fibre does not reach my house so I guess that I do not have FTTP or FTTH.
If you are using the Orbi in Access Point mode, just connect it to the SH2 LAN port to LAN port.
Thank you, I will try that.