Forum Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
imjolly
Distinguished Sage
Distinguished Sage

on ‎20-12-2022 22h20

242 Views
Message 11 of 13

Re: Wired networknotworking

Did you try a factory reset by pressing the recessed button on back and holding for 20/30 seconds until hub lights flash and see if that helps you connect your devices



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
Jasperogg60
Beginner

on ‎20-12-2022 22h45

236 Views
Message 12 of 13

Re: Wired networknotworking

Tried that a few times not good

0 Ratings
Reply
countrypaul
Expert

on ‎20-12-2022 23h17

221 Views
Message 13 of 13

Re: Wired networknotworking

You said the PS is directly wired (presumably to the SH2), have you tried it in all the ethernet sockets on the SH2 and tried multiple ethernet cables?  Can you try anything else directly wired as a test, eg laptop? 

This may seem daft, but can you check that the SH2 is issuing ip adresses - if DHCP has been turned off then it will not - the resets should have turned it on anyway if it was off but worth cecking

If everything fails to connect then it would suggest the Ethernet ports on the SH2 are suspect - try reporting it to BT and they might be able to resolve it or replace your SH2.

Reply