cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,369 Views
Message 1 of 4

Broadband dropped from 60 to less than 20

Go to solution

A few weeks ago our broadband speed dropped significantly, and I did some tests at different times of day with just one short ethernet cable directly in the HomeHub 6 and it shows around 10-12 Mbps and is not enough when all the family have classes at the same time. The BT Broadband speedtest shows around 18-20Mbps. Apart from going up the pole to check that my wire entering the terminal block is not rusted through like it was a few years ago, what is my best course of action?

0 Ratings
3 REPLIES 3
1,366 Views
Message 2 of 4

Re: Broadband dropped from 60 to less than 20

Go to solution



in order for the forum members to help please can you post the stats from your router (if hub enter 192.168.1.254 in your browser) and if  HH5 then go to troubleshooting then helpdesk and if HH6/SH2 then advanced settings then technical log information . 

Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal

 

enter your phone number and post results  remember to delete number   https://www.broadbandchecker.btwholesale.com/#/ADSL

Someone may then be able to offer help/assistance/suggestions to your problem



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
1,354 Views
Message 3 of 4

Re: Broadband dropped from 60 to less than 20

Go to solution
Thank you. That has probably answered my question. I will keep an eye on the log information for a while in case the rate increases before taking it further
0 Ratings
1,278 Views
Message 4 of 4

Re: Broadband dropped from 60 to less than 20

Go to solution

I followed some advice and 2 days ago checked wiring for interference, moved AC wires away from the hub to BT socket wires, checked the connection in the BT faceplate socket, switched off the powerline adaptors, restarted the hub and the Line Attenuation has dropped from 40 to 15 dB but Noise Margin has gone up from 9/6 to 20/18, and data rate has gone down from 25 to 22.4 below. Until recently I was getting around 60Mbps. Any suggestions?

Firmware updated:

22-Mar-2020

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

2 Days, 4 Hours 43 Minutes 8 Seconds

Data rate:

7.20 Mbps / 22.40 Mbps

Maximum data rate:

27746 / 64515

Noise margin:

20.1 dB / 18 dB

Line attenuation:

15.4 dB

Signal attenuation:

11.4 dB / 15.4 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

2 GB Uploaded / 35 GB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-QXCG

2.4 GHz wireless channel:

Smart (Channel 1)

5 GHz wireless network name:

BTHub6-QXCG

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

F4:6B:EF:39:B5:7D

Software variant:

-

Boot loader:

7.33.1

0 Ratings