cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,159 Views
Message 1 of 3

Here we go again

Hi.

back in November i was stuck in a banded profile, a mod @JohnC2 sorted it out and i got speeds as shown below

 

BT Hub 6A

Serial number:

+084319+NQ73768297

Firmware version:

SG4B1000E01E

Firmware updated:

15-Aug-2019

Board version:

1.0

Gui version:

1.105.0

DSL uptime:

9 Days, 13 Hours 48 Minutes 22 Seconds

Data rate:

6.96 Mbps / 41.71 Mbps

Maximum data rate:

7002 / 43019

Noise margin:

6.1 dB / 4.1 dB

Line attenuation:

24.6 dB

Signal attenuation:

0 dB / 24.6 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

 

now over the last 6-8 weeks speed has droped back and it appears im again on a stuck profile.

 

This is a list of your BT Smart Hub settings and current statistics.

Product name:

BT Hub 6A

Serial number:

+084319+NQ73768297

Firmware version:

SG4B1000E020

Firmware updated:

25-Mar-2020

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

2 Days, 15 Hours 2 Minutes 31 Seconds

Data rate:

5.96 Mbps / 30.40 Mbps

Maximum data rate:

5979 / 37319

Noise margin:

6 dB / 4.9 dB

Line attenuation:

37.9 dB

Signal attenuation:

23.5 dB / 37.9 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

quite line test is perfect.

help needed again please.

 

 

0 Ratings
2 REPLIES 2
1,135 Views
Message 2 of 3

Re: Here we go again

you are not stuck in a banded profile this time

have you tried using the test socket wit a filter to see if that improves your connection speed.  you line attenuation was 24.6db but now it has jumped to 37.9db suggesting a line problem

check this post

https://community.bt.com/t5/Home-setup-Wi-Fi-network/Bug-in-firmware-HH6-SG4B1000E020/m-p/2053308



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,113 Views
Message 3 of 3

Re: Here we go again

  • Thanks for quick response, line attenuation jumped to 37.9 after firmware update in March. 
0 Ratings