ok I have full fibre halo 3 package & I got the 3 black disks included in the package.
I have used all 3 disks around the house & they are all connected to the smart hub 2 via Ethernet.
I have added a 4th disk to my network which is in an outbuilding we use as a gamesroom/gym again this is connected to the network via Ethernet it’s too far away from main house to pick up a strong WiFi signal.
since I’ve added the 4th disk I have noticed in the app that 3 of the disks will show devices connected to them but always 1 of them shows 0 devices connected & it’s always between the same 2 that do this & whichever one is showing 0 devices the devices right next to it will not connect to it for instance.
if I am right next to the disk with my iPhone I can see it has 2 bars of wifi connectivity when I check in the app my iPhone is connected to the main hub which as I move closer to it gives me 3 full bars. Usually if I am right next to the disk if I turn the wifi on my phone off for a minute then back on again it then connects to the wifi disk I’m closest to but since I added the 4th disc if in the app the disk is showing 0 devices connected & I try to connect to that disk using the method I explained even when I’m right next to it I cannot get it to connect to that disk.
Sorry it’s a long explanation hopefully I have explained this so everyone can understand my set up.
I didn’t get the 4th disk from BT I bought it second hand but it is the same as the 3 disks I got from BT so there shouldn’t be any compatibly issues & I set it up the same way as the other 3 disks.
With the smart hub 2 Is 3 black disks the maximum you can have on your network or is the issue because the disk was not sent to me via BT?
Thanks in advance.
Solved! Go to Solution.
Sorry I didn’t know I got a reply you don’t get an e mail notification when you do.
thank you for that he does say up to 6 so My 4 shouldn’t be a problem.
I still get the problem so there must be something else going on it might be a case I have to set them all up again.