cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,879 Views
Message 11 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

What a pain!

And UK numbers?  Do they have to start with "00 44"?

Thanks

 

0 Ratings
1,871 Views
Message 12 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa


@Misha1wrote:

What a pain!

And UK numbers?  Do they have to start with "00 44"?

Thanks

 


Hi @Misha1   UK numbers dialled in the U.K. do not require an international dialling code! So the answer to your question is no. Obviously all numbers do need the local area code. Also don’t use any spaces in the numbers as this stops the calling I’d recognising the caller. For example 01234 567 8901 should be entered as 012345678901.

1,859 Views
Message 13 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Thanks.

I know that when dialling using a UK mobile or landline phone one doesn't need the "00 44" but I wasn't sure whether this applies to BT's DV.

So "all" I need to do to the .vcf file exported from our Mac Contacts is:

-  Replace each "+" with "00"

-  Strip out all spaces from phone numbers

Is that right?

Thanks

0 Ratings
1,771 Views
Message 14 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Hi Misha,

Did you manage to make this work? Is there way of importing contacts to by BT homephone? Very annoying if there isn't. 

0 Ratings
1,764 Views
Message 15 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Hi @KalK,

I have made it work but using quite a few steps. My starting point is the Contacts app on our rather ancient Mac and the steps are:

  • Export the Contacts using the Mac "Exporter for Contacts" app (which I purchased for about £10).

  • Using the "vCard Phone  Number Formatter" (which Stefan, the creator of the Exporter app, sent me), replace each “+” with “00” and remove spaces, hyphens & brackets from phone numbers.

  • Bulk edit the resulting vcf file as follows:

       Remove each “;type=pref”

       Remove each “;type=VOICE”

       Replace each “TEL;” with “TEL;VALUE=uri;”

       Replace each “type=HOME:” with “TYPE=home:tel:”

       Replace each “type=CELL:” with “TYPE=cell:tel:”

       Replace each “type=WORK:” with “TYPE=work:tel:”

Thats wasn't too bad, was it?!

😀

0 Ratings
1,742 Views
Message 16 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Thanks very much MIsha..that's amazing of you. Sadly, I only have the basic digital phones that BT sent me when i upgraded to full fibre. I assume I need the more upmarket type with Alexa. Do you know?

0 Ratings
1,737 Views
Message 17 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

@KalK 

Contacts are stored in the Hub, so not dependent on the handsets.

0 Ratings
1,729 Views
Message 18 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

@rbz5416 

How does one find/access that bit in the Hub? Sorry to ask....complete newbie to all this.

Thanks

0 Ratings
1,717 Views
Message 19 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Hi @KalK,

  • Type 192.168.1.254 into your browser.
  • Click on the box labelled "Phone" in the leftmost column of the Hub display.
  • Click on "Contacts" in the top left corner.
  • Click on "Browse".
  • Supply your admin password.
  • Click on "Contacts" in the top left corner (again).
  • Click on "Browse" (again).
  • Select the .vcf (ie vCard) file you want to import.
  • Click on "Import".

Enjoy!

0 Ratings
1,696 Views
Message 20 of 20

Re: Importing Contacts to Advanced Digital Home phone with Alexa

Amazing...you are a superstar! Thank you SO much. I was envisaging months of slowly adding contacts during the winter months as I ran out of things to watch on Netflix. 

 

0 Ratings