- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
It does not surprise me that CS did not know the answer, its a legacy issue that only people like myself, who have spent their whole working life on telephone systems, would be aware of the need for a "bell" wire. It goes back to the days of mechanical dial telephones (1960s)
I suspect that CS would only suggest that you buy a new phone from BT. A new DV is unlikely to be any better. I can see lots of people with older phone, having problems.
A simple adapter, with a capacitor inside, would solve the problem, but I doubt BT would bother.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
I have no idea of the age of the phones but safest to say they are not new! so probably are ten years old.
I have had a hunt around in various old BT router boxes and found a total of three filters, never had to use them as BT had so much trouble getting ADSL working here originally (ally cabling through village) that they put an ADSL faceplate on. Looks untidy with the filter but at least it works.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
from the adapter notes that @Keith_Beddoe posted BT were obviously aware that older phone of 10yrs or more could have problem with not ringing just as @Keith_Beddoe described. It would have helped if BT had posted the solution as well
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@imjollywrote:from the adapter notes that @Keith_Beddoe posted BT were obviously aware that older phone of 10yrs or more could have problem with not ringing just as @Keith_Beddoe described. It would have helped if BT had posted the solution as well
So our line has moved to DVA today and have plugged in adapter, paired it with router but phone won't ring.
Having read this thread looks like issue is phone being over 10 years old. Any tips as to what to look for in a new phone, just needs to be a basic phone as is not really used much. Thanks.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@Keith_Beddoewrote:Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
Tried that but phone still didn't ring
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@smc78 wrote:
@Keith_Beddoewrote:
Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
Tried that but phone still didn't ring
Most microfilters have the extra component (capacitor), and provided the plug from the microfilter is plugged into the DVA socket, and the phone itself is plugged into the phone side of the microfilter, it should pass the ringing current onto the ring wire of the phone.
The broadband side of the microfilter is not used.
The only phones that may have an issue, are those with a mechanical bell inside, but these usually have a dial, which would not work anyway.
All modern phones should work just fine, as they only need two wires.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@Keith_Beddoewrote:
@smc78wrote:
@Keith_Beddoewrote:Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
Tried that but phone still didn't ring
Most microfilters have the extra component (capacitor), and provided the plug from the microfilter is plugged into the DVA socket, and the phone itself is plugged into the phone side of the microfilter, it should pass the ringing current onto the ring wire of the phone.
The broadband side of the microfilter is not used.
The only phones that may have an issue, are those with a mechanical bell inside, but these usually have a dial, which would not work anyway.
All modern phones should work just fine, as they only need two wires.
I will need to have another play about with it.
Should filter still be plugged into wall and then another with phone into adapter?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@smc78 wrote:
@Keith_Beddoewrote:
@smc78wrote:
@Keith_Beddoewrote:
Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
Tried that but phone still didn't ring
Most microfilters have the extra component (capacitor), and provided the plug from the microfilter is plugged into the DVA socket, and the phone itself is plugged into the phone side of the microfilter, it should pass the ringing current onto the ring wire of the phone.
The broadband side of the microfilter is not used.
The only phones that may have an issue, are those with a mechanical bell inside, but these usually have a dial, which would not work anyway.
All modern phones should work just fine, as they only need two wires.
I will need to have another play about with it.
Should filter still be plugged into wall and then another with phone into adapter?
Yes, if you are on FTTC, you need both. One to act as an adapter to allow your home hub to connect to your phone socket, assuming you do not have a filtered socket.
The other one needs to plug into the socket on the DVA, and then the phone then plugs into the microfilter.
It may seem a bit unusual, but there is more to a microfilter than you realise.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: Phone plugged into digital voice adapter works but does not ring.
@Keith_Beddoewrote:
@smc78wrote:
@Keith_Beddoewrote:
@smc78wrote:
@Keith_Beddoewrote:Add a microfilter in the lead to the phone, as it has the components to enable the phone to ring.
Tried that but phone still didn't ring
Most microfilters have the extra component (capacitor), and provided the plug from the microfilter is plugged into the DVA socket, and the phone itself is plugged into the phone side of the microfilter, it should pass the ringing current onto the ring wire of the phone.
The broadband side of the microfilter is not used.
The only phones that may have an issue, are those with a mechanical bell inside, but these usually have a dial, which would not work anyway.
All modern phones should work just fine, as they only need two wires.
I will need to have another play about with it.
Should filter still be plugged into wall and then another with phone into adapter?
Yes, if you are on FTTC, you need both. One to act as an adapter to allow your home hub to connect to your phone socket, assuming you do not have a filtered socket.
The other one needs to plug into the socket on the DVA, and then the phone then plugs into the microfilter.
It may seem a bit unusual, but there is more to a microfilter than you realise.
Well I tried putting filter on again and this time it worked, no idea why it didn't earlier. Thanks!!!