cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,816 Views
Message 1 of 11

Profile Reset Request

@NeilO 
As requested earlier today, new post showing line stats.

Don't worry too much about only eight days connection, we had a power cut last week. Picture 1 shows syncing at 43998 Kbps with a maximum fluctuating around 52,000 Kbps. This is with download snr of between 9 and 10 dB. 

Without the banding at 44 Mbps, with G.inp and vectoring working properly, the line is stable at 60 Mbps with a snr of 3 dB. The high UAS figure on Picture 3 is only due to training the vectoring on connection, as can be seen on picture 4 with the difference between link time and system time being 5 minutes.

As with @JohnnyFP 's post, I have two university students trying to work from home, one of them in the third year of a computer science course who uses a lot of bandwidth on a VR project, so any improvement would help all of us.

Banding has been in place since last year following a problem at the local cabinet when the mains power feeding it shorted out. It took so long to be fixed that the batteries failed leaving power to go on and off multiple times as UKPN repaired their connection.

44332211

0 Ratings
10 REPLIES 10
2,810 Views
Message 2 of 11

Re: Profile Reset Request

Don't know if just me but only page I can't read is page 1 as just blurs when I try to enlarge



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,809 Views
Message 3 of 11

Re: Profile Reset Request

Yep, just trying to sort it out thx.
0 Ratings
2,795 Views
Message 4 of 11

Re: Profile Reset Request

@imjolly  It's not just you.

0 Ratings
2,785 Views
Message 5 of 11

Re: Profile Reset Request

Open Fri, 12 Feb 2021, 1659.png

 

 

@imjolly  @pippincp Try this.

0 Ratings
2,780 Views
Message 6 of 11

Re: Profile Reset Request

6147C6D9-332B-496A-ABEC-8DF58C44EF55.jpeg

This is just to show progression of stats in one morning as vectoring and G.inp kick in moving maximum rate up from 46Mbps to over 60Mbps.

 

0 Ratings
2,777 Views
Message 7 of 11

Re: Profile Reset Request

@NoSirItWasntMe 

that's better and can read that now

can't see anything in stats that shows internet connection time just system uptime which is something different.  Is there anymore stats that show internet time?



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,766 Views
Message 8 of 11

Re: Profile Reset Request

@imjolly 

Picture 3 shows total up time 8 days 23 hrs 41 minute 12 seconds.

Picture 4 shows link time 8 days 23 hrs 36 mins 15 seconds.

As I said above the UAS number of 296 seconds is due to extended handshake configuring vectoring.

0 Ratings
2,696 Views
Message 9 of 11

Re: Profile Reset Request

Updated stats as of now:

Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 5612 Kbps, Downstream rate = 52287 Kbps
Bearer: 0, Upstream rate = 5612 Kbps, Downstream rate = 43998 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 9.9 5.9
Attn(dB): 25.6 0.0
Pwr(dBm): 12.4 2.1

VDSL2 framing
Bearer 0
MSGc: -6 26
B: 179 175
M: 1 1
T: 0 37
R: 8 14
S: 0.1295 0.9948
L: 11614 1528
😧 4 1
I: 188 95
N: 188 190
Q: 4 0
V: 3 0
RxQueue: 135 0
TxQueue: 27 0
G.INP Framing: 18 0
G.INP lookback: 27 0
RRC bits: 0 24
Bearer 1
MSGc: 90 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 10.6667 0.0000
L: 24 0
😧 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0

Counters
Bearer 0
OHF: 0 214240
OHFErr: 138 115
RS: 1484941164 4183456
RSCorr: 9901267 274
RSUnCorr: 0 0
Bearer 1
OHF: 63838381 0
OHFErr: 13 0
RS: 383029915 0
RSCorr: 1768 0
RSUnCorr: 13 0

Retransmit Counters
rtx_tx: 1445975 0
rtx_c: 698433 0
rtx_uc: 198 0

G.INP Counters
LEFTRS: 460 0
minEFTR: 43989 0
errFreeBits: 687965583 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 851675907 0
Data Cells: 453739836 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 79 112
SES: 3 0
UAS: 296 296
AS: 1025381

Bearer 0
INP: 55.00 0.00
INPRein: 1.00 0.00
delay: 0 0
PER: 0.00 9.23
OR: 0.01 27.71
AgR: 44306.07 5639.61

Bearer 1
INP: 2.50 0.00
INPRein: 2.50 0.00
delay: 0 0
PER: 16.06 0.01
OR: 47.81 0.01
AgR: 47.81 0.01

Bitswap: 433178/890764 393/416

Total time = 11 days 20 hours 54 min 37 sec
FEC: 9901267 274
CRC: 138 115
ES: 79 112
SES: 3 0
UAS: 296 296
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Latest 15 minutes time = 9 min 37 sec
FEC: 7486 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 15 minutes time = 15 min 0 sec
FEC: 13867 7
CRC: 0 2
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: N/A
Latest 1 day time = 20 hours 54 min 37 sec
FEC: 1547887 29
CRC: 15 8
ES: 10 8
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 1 day time = 24 hours 0 sec
FEC: 2655328 23
CRC: 41 5
ES: 23 5
SES: 3 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Since Link time = 11 days 20 hours 49 min 41 sec
FEC: 9901267 274
CRC: 138 115
ES: 79 112
SES: 3 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0

11 days 20 hours connected with only 79 Error Seconds in total, waiting months for DLM to relent hasn't worked, so can I please ask one of the mods to speak to me regarding a remote DLM reset?

 

Thanks

0 Ratings
2,654 Views
Message 10 of 11

Re: Profile Reset Request

Hi @NoSirItWasntMe thanks for posting those stats and sorry about the delay getting back to you. I think it would be worth trying a DLM reset but we'll need to do some diagnostics on our side to make sure there are no underlying issues with the line. I'll send you a private message so you can get in touch with the moderation team and we'll be happy to help.

Thanks

Neil

0 Ratings