I have an external NTE installed to run my traditional fibre connection. (No FTTH available here.)
It has 3 UTP cables installed on the consumer (right) side: 1. phone 1 (does nothing at all), 2. phone 2, 3. internet. Both of them are connected via the orange / white orange simply.
In the house, we have the version 1 master socket some at least 10-15 meters away with double connection points (and no filters as far as I see) connected with one single UTP (cable no 4): orange&white-orange to the data, while green&white-green to the phone. (Cable no 4 is definitely not the same as cable No3 coming into the house.)
Which means the two external UTP-s are connected together somewhere to run to the internal master socket.
Is it the best practice ?
Or could this explain my connection issues? (Again I have no idea if the coupling of the cable 2 & 3 & 4 has been made by some proper shielded connection box or just connected the wires simply...)
Should I invest in cabling and move my master socket (and the HH) closer to the external NTE to eliminate the unknown junction between them?
Ext NTE
NET -------orange--------- ----orange----------
(Cable 3) -------or-white------- ????? -----or-white------- internal master
unknown junction --------green------- socket
TEL -------orange-------- --------gr-white---- (Cable 4)
(Cable 2) -------or-white------
