cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
774 Views
Message 41 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

Hi, just quick update,...as now working. AP router reboots per major change, so took a little while. Anyway AP hooked into WAN port & all good. Now I've just to set AP with our SSID & drop SH2 WiFi.  Thanks for the guidance.

BTW I've submitted feedback asking for BT community forum be replicated across EE forum. A common repository would be beneficial.

757 Views
Message 42 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

Just out of interest, is that the WAN port on the SH2?  If it is, is it set as a WAN port on the SH2 or is set with FTTP mode turned off, (in which case it behaves as LAN port 4)?  I only ask because I am surprised that works.

0 Ratings
Reply
749 Views
Message 43 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

I'd imagine must be set as a LAN port, I seem to recall you were expected (or rather the installation person was) to switch it from the defaut LAN setting if moving to FTTP. Certainly that was the case when I moved to FTTP.



 

0 Ratings
Reply
734 Views
Message 44 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

Sorry, should have clarified. It's the WAN port on Netgear. FYI a little more config to do e.g. disable DSL.

724 Views
Message 45 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

Interesting.  I would not expect that to work unless the port is dual purpose.  Thanks for the update.  Something I'll look into when I have time.

684 Views
Message 46 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution

@google1901   Ah, it was you talking about using it as an AP that threw me.  I assumed you were just trying to set it up as a wireless access point.

Reading the posts again, you’re actually using the D6400 as the router to a separate network, albeit a wireless network, in which case that configuration should work.

0 Ratings
Reply
649 Views
Message 47 of 47

Re: BT Smart Hub2 WiFi broadcasting without an SSID despite being turned off

Go to solution
I'm glad you got sorted, but it would have been good to raise this on a seperate thread and keep the original thread clean, as your secondary issue was really was nothing to do with the original topic
0 Ratings
Reply