i have 866 link speed on my pc but only download between 250mbps and 300mbps how do i get like 900 mbps download is it the smart hub 2 router or is it a pc adapter problem
Solved! Go to Solution.
You need to use Ethernet not Wi-Fi. Paying for FF900 is pointless if you’re only going to use Wi-Fi. You could look at getting an AX router and AX adapter for your PC to improve the speed.
How are you testing the download speed - which site are you using?
How is your PC connected to the SH2, via WiFi or Ethernet, or Powerline adapters etc?
What is the configuration of your PC, does it use a HD or SSD etc? Make/model might help.
If using anything other than Ethernet your download speed is likely to be more limited.
can i install digital voice in the old gfast socket instead of in the back of smart hub 2 becuase im getting a 3rd party router instead of smart hub 2 router i have open reach modem and gfast socket just wondering if i can put my phone in old gfast socket will that be fine for digital voice
if you have FTTP then the old master socket will no longer work and you need to connect phone to socket on back of hub and hub needs to be connected directly to ONT
so basically i have to set it up as a second router how do i do it if i want my wifi 6 router to have auto qos mino etc
You can try following these instructions on setting up a second router with a SmartHub 2:
https://community.bt.com/t5/Home-setup-Wi-Fi-network/Smart-Hub-2-and-Bridge-Mode/m-p/2307011#M203811