WBC FTTP is available at my house as a 1 Stage Install Process – “Single Dwelling Unit Residential OH Feed with no anticipated issues.” However, I would prefer the cable to be underground. The pole is 20 metres from the house, easy dig over soft ground, which I could do myself prior to installation.
I don’t want to place on order with BT until I know whether this proposal is feasible, so wonder if anyone has similar experience - is OR likely to be agreeable to this, if so how best to contact them?
Thanks in advance.
Solved! Go to Solution.
They haven't been known to. How close is the pole to your property boundry? If even a metre or less who owns the intervening space? Will it require a dig to install a duct from pole to property?
What seems simple to you is not always the case.
Many thanks. The pole is on my property, as agreed with OR. I could dig a 20m trench by hand to a 300mm depth easily (or can borrow a friend's mini-digger). It would be much neater than OHC to gable end of house, along and down to suitable entry point. After all, it's infrastructure for decades to come, but I suppose OR will want to do what's easiest for them.
Because you order with a CP ( communication provider ) but it’s Openreach or an OR Contractor that will do the actual installation work , the chances are you won’t get BT to commit to any particular method of installation, so if it’s a deal breaker , any insistence by yourself, that it’s underground or you won’t order , chances are you won’t order , its the way the industry is mandated by Ofcom to be structured, that you cannot speak to Openreach directly.
If you supply the means ( a roped duct from the pole to your property external wall ) then the OR tech probably won’t have a problem using it , as underground feeds from a pole to a property are allowed, but the installer may well not have the necessary ‘stores’ with them , as a cable ran down a pole into a duct should be behind capping on the pole , and on the house wall , expecting to serve a property overhead , the installer may not necessarily have these items to hand , namely,
Capping Steel No.1, Connector Bend No.1, at the pole end , and BT Connector Bend No.4, BT Capping 25 at the house wall, and preferably a Duct 56 and a 2x Duct bend ,installed by yourself in advance , OR would supply this FOC on building developments but how to arrange this in your situation is unknown