How do I take the front cover off an Openreach Fibre box to allow wall paper stripping and re-papering?
I want to get to the screws on the wall - but don't want to break the front cover.
Also been told NOT to disconnect the fibre cable in any circumstances - is this true?
Couldn't attach photo but looks like this - https://www.youtube.com/watch?v=o-PtbckU9ws
Thanks
Rob
Solved! Go to Solution.
Hi @Rob33 I don't know what I am talking about, but doesn't the whole thing simply unhook from the wall by moving it upwards? Obviously, be very careful with the cables.
A wall mounted ONT , like the one shown in the supplied link (so not inside an enclosure) , as stated can be manoeuvred off its location screws by gently pushing it upwards ( 0.5cm ) then forward from the wall , obviously taking care with the optical cable , refitting the same process in reverse.
There is some truth in not disconnecting the cable.
The mating faces on fibre optic connections are very sensitive to dust and scratches, so unless you have the right cleaning kit to hand, it is best left alone.