Using LAN cables with Full Fibre

[sheilaj]

I have signed up for Full Fibre installation and have some questions.  I understand that I will need a new kind of router. Will I be able to use LAN cables with this new kind of router?   Currently I run a LAN cable to my laptop from the router and a very long LAN cable to the TV so that I do not need the WiFi switched on. (I prefer not to use WIFi).    Currently, if I need to switch the WiFi on, I can do that through the Hub Manager on my laptop. Will this all be the same with the Full Fibre router? 

Also if I find at some point in the future I need a medical alarm, can this be done at a later date - that is after I will have had Full Fibre installed and have no landline?

Thank you

[gg30340]

Yes Ethernet cable work with Full Fibre. You can use CAT5e but Cat6 is better. It can be run up to 100 meters.

The new hub which may be a Smarthub 3  is managed in exactly the same way as the previous hubs.

The alarm can be added at a later date.

[sheilaj]

Thanks for speedy reply. So I can definitely have the WiFi turned off?

[licquorice · Accepted solution]

If you are currently a BT customer with a smart hub2, nothing will change. You will just connect the hub to the fibre modem (ONT) instead of the master socket.

[licquorice]

The only downside is that you will lose LAN port 4 as a LAN port as it will become the WAN port to connect to the ONT, hence you will only be able to connect 3 devices via LAN cables. If you require more ports, 4 port Ethernet switches are very cheap.

[sheilaj]

Thanks for that. Good to know. I should be able to manage with three!

[gg30340]

If you do not already have a Smarthub you may get a Smarthub3 when you move to Full Fibre. It has four LAN ports that can be used.

It has a WAN port to connect to the ONT which saves the need to use a LAN port like with the Smarthub 2.